The XL can fit many larger crossovers, SUVs, trucks, and vans equipped with a properly rated roof rack or bed rack. Compatibility depends on the vehicle’s roof-load rating, rack capacity, usable roof space, crossbar position, and mounting clearance.

Its 87 lb weight may fall within the capacity of some smaller vehicles, but the 90-by-52-inch footprint is more likely to be the limiting factor. Confirm that the tent does not extend beyond the rack or roof in a way prohibited by the vehicle or rack manufacturer.

Yes, Factory-style crossbars must be approved for rooftop tent use, support the required dynamic load, and provide enough clearance for the included brackets. Inspired Overland publishes mounting guidance for traditional and factory-style crossbars.

Yes, it can be mounted to many platform and aluminum-extrusion racks. Depending on the platform design, alternative hardware or a rack-specific installation method may be necessary.

While driving, the complete roof and rack system must support at least the tent’s 87 lb weight plus the rack, crossbars, and any additional accessories. While parked, it must support the tent, occupants, bedding, and gear.

Yes. The XL includes 3.5-inch brackets and the standard mounting hardware required for installation.

Two or more people are recommended. Although 87 lbs is lightweight for an XL rooftop tent, its 90-by-52-inch footprint makes it bulky and difficult to position safely by yourself.

Installation time depends on the vehicle and rack. A straightforward crossbar installation can generally be completed in one session after rack capacity, spacing, and bracket clearance are confirmed.

Basic hand tools are typically required to position and tighten the mounting brackets. The exact tool sizes may vary depending on the supplied hardware and rack configuration.

Yes. Check the brackets and fasteners after the first drive, after the first few trips, and periodically during ownership. Inspect the installation again after rough-road travel.

The XL is designed for two people and provides an interior sleeping area measuring approximately 86 inches long by 50 inches wide.

The XL increases the exterior footprint from the Standard’s 82-by-50-inch size to 90 by 52 inches. Its interior measures 86 by 50 inches, compared with the Standard’s 78-by-48-inch sleeping area. The XL weighs 87 lbs versus 76 lbs for the Standard.

Yes. It includes a 1.5-inch foam mattress and an anti-condensation pad beneath the sleeping area.

No. Inspired Overland states that its rooftop tents use crossbars instead of a traditional floor panel. This construction is intended to reduce overall weight while maintaining support.

A limited amount of low-profile bedding may fit, but bulky pillows, thick sleeping bags, or oversized blankets can make the tent harder to close and place unnecessary pressure on the canopy and travel cover.

The XL is covered by Inspired Overland’s limited manufacturer warranty against qualifying defects in materials and workmanship. Environmental damage, misuse, neglect, and improper installation are generally excluded.

Inspired Overland lists replacement brackets, gas struts, and other rooftop-tent components through its help center and spare-parts catalog. Availability may vary.

Inspect the carton, pallet, straps, and tent before signing the delivery receipt. Photograph any visible damage, note it on the delivery paperwork, and refuse delivery if the tent appears severely damaged.

Stop installation, retain all packaging materials, photograph the damage clearly, and contact Highland Trail Club immediately. Freight claims are time-sensitive and require documentation.

Contact Highland Trail Club first. Include your order information, vehicle details, rack specifications, photographs, and a clear description of the issue so we can review the situation and coordinate the appropriate next step.