The Standard can fit many cars, crossovers, SUVs, trucks, and vans equipped with a properly rated roof rack or bed rack. Compatibility depends on the vehicle’s roof rating, rack capacity, crossbar design, crossbar placement, and available mounting clearance.

Factory-style crossbars must be approved for rooftop tent use, provide enough dynamic capacity for the 76 lb tent, and leave sufficient space beneath the bars for the mounting brackets. Inspired Overland provides separate installation guidance for traditional and factory-style crossbars.

Yes, the Standard can be installed on many platform and aluminum-extrusion roof racks. Depending on the rack design, the installation may use a different bracket orientation or rack-specific hardware. Inspired Overland provides dedicated guidance for racks such as Sherpa, Prinsu, and similar systems.

Yes. The bed rack must provide two secure crossbars or mounting rails, sufficient bracket clearance, and enough dynamic and static capacity for the tent and occupants.

While driving, the vehicle roof and rack must support at least the tent’s 76 lb weight plus the rack, crossbars, and any additional accessories. While parked, the complete system must support the tent, occupants, bedding, and gear.

Yes. The Standard includes 3.5-inch mounting brackets and the standard hardware required for installation.

Two people are recommended. Although 76 lbs is light for a rooftop tent, the tent’s 82-by-50-inch footprint still makes it awkward for one person to safely lift and position on a vehicle.

Installation time depends on the rack and vehicle. A straightforward crossbar installation can generally be completed in one session once the rack position, crossbar spacing, and bracket clearance have been confirmed.

Basic hand tools are typically required to position and tighten the mounting brackets. The exact tool sizes may vary depending on the supplied hardware and rack configuration.

Yes. Recheck the brackets and fasteners after the first drive, after several early trips, and periodically throughout ownership. Hardware should also be inspected after rough-road travel.

It is designed for two people and provides an interior sleeping area measuring approximately 78 inches long by 48 inches wide.

Yes. It includes a 1.5-inch foam mattress and an anti-condensation pad beneath the sleeping surface.

Inspired Overland uses a crossbar-supported construction instead of a traditional solid floor panel. The design is intended to reduce weight while maintaining support beneath the enclosed sleeping area.

A limited amount of low-profile bedding may fit. Thick pillows, bulky sleeping bags, and oversized blankets can make the tent harder to close and may place excess pressure on the fabric and vinyl cover.

Clean the fabric and travel cover with mild soap, clean water, and a soft cloth or brush. Allow the tent, mattress, and condensation pad to dry completely before closing it for extended storage.

Inspired Overland provides the original purchaser with a two-year limited warranty against qualifying defects in materials and workmanship.

Inspired Overland lists replacement brackets, gas struts, and other components through its help center and spare-parts catalog. Availability may vary by component and production run.

Inspect the carton, pallet, straps, and tent before signing the delivery receipt. Photograph any visible damage, note it on the delivery paperwork, and refuse delivery if the tent appears severely damaged.

Stop installation, retain all packaging materials, photograph the damage clearly, and contact Highland Trail Club immediately. Freight claims are time-sensitive and require documentation.

Contact Highland Trail Club first. Include your order information, vehicle details, rack specifications, photographs, and a clear description of the issue so we can review the situation and coordinate the appropriate next step.